Siemens iQ700 EX875LX67E 80cm Venting Induction Hob 4 Zones - Black

Siemens iQ700 EX875LX67E 80cm Venting Induction Hob in Black

We think this is perfect for: An island or peninsula hob where there is nowhere sensible to hang an extractor. Especially suited to a worktop with a stainless steel run, since this one carries steel side trim rather than being fully frameless.

Why Webbs Recommends This: The extractor is built into the hob and pulls fumes down at the pan instead of up past your face. It runs 9 speeds plus a booster, up to 622 m³/h, in recirculation or full extraction. The hob has 4 zones, 2 of them flex and 2 bridging, across 17 power levels. It is B rated at 62 kWh a year. More in our venting hobs range.

flexInduction With powerMove Plus

The 2 flex zones read the pan and heat only the area it covers, so a fish kettle or a griddle works across a bridged pair. powerMove Plus splits a zone into heat settings front to back, so you slide a pan to change its power rather than reaching for the controls. Auto pan detection, Flex Motion, extendable zones and a boost function are all fitted.

Extraction From 154 to 622 m³/h

Airflow runs 154 to 622 m³/h at 42 to 74dB. Normal maximum extraction is 500 m³/h at 69dB, rising to 622 m³/h at 74dB in boost. Ventilation starts automatically and runs on after you stop, a climate control sensor adjusts it as you cook, and a clean filter indicator flags servicing. Grease filter efficiency is B rated.

fryingSensor Plus, Dish Assistant and Home Connect

fryingSensor Plus holds a pan at temperature so nothing burns, and Dish Assistant guides settings by dish. Home Connect adds app control. Keep warm, Stop and Go, restart, a timer, residual heat indicators, a panel lock and overheating protection are included. It is flush fit, 81.2cm wide and 52.0cm deep, and needs 7.4kW on a 32A fuse with a 1.1m cord.